Wednesday, April 27, 2022

CNC Machine - Setup Time Reduction - Bibliography - Case Studies



ADVANCED MANUFACTURING - AUTOMATE CNC SETUP. MAXIMIZE PRODUCTIVITY.

Optimize your CNC milling machine usage with automated setup and on-machine verification. Adopt a ‘right-first-time’ approach to manufacturing parts that significantly reduces machine setup time, saves on potential re-work, and maximizes your productivity.








2021
Standardized Workholding Saves Shop Hours of Setup Time
5th Axis’ workholding solutions have enabled Will-Mor Manufacturing to achieve vastly better repeatability and stability, cutting setup time and even whole setups.
7/7/2021

2019
Application of the single-minute exchange of die system to the CNC sector of a shoe mold company
Rodrigo Borges Ribeiro et al.
Cogent Engineering
Volume 6, 2019 - Issue 1
https://www.tandfonline.com/doi/full/10.1080/23311916.2019.1606376


2014

In a machine shop with  45 employees, a four-axis CNC lathe was used to make large aerospace parts that were shipped on a monthly basis.  The change over and setup for one of the routine parts was taking just under 16 hours (two shifts).  Since the set up took so long, the company was typically making 3-5 months worth of parts at a time and store them  and then ship them out of inventory.  Occasionally customers would make changes to parts, which meant that the parts that had already been made were no longer what the customer wanted.  Also as the lathe was making parts of a batch of 3-5 months, the lathe was not availabe for other current, more pressing demands.

Six employees spent five days studying the process and reducing the changeover and setup time. A target of 50% reduction was chosen (Shigeo Shingo says, separating external and internal activities will give the size of saving).

At the end of the five day event, one changeover and set up had been done in 7 hours.  Additional improvements  would take three more weeks to implement setup will take  5 to 5 1/2 hours.

Savings:  The company has four of these lathes and by applying what had been learned to all four lathes, sixty four hours per week could now be used for making parts.  With changeovers taking less than one shift, the company decided that they would make parts for that month requirement only , so the cost of parts being held in storage was eliminated.
http://www.systemsquality.com/ id26.html (Site not available now)


Setup Time Reduction on CNC Shaper  2011 article
http://www.interscience.in/IJMIE_Vol1Iss1/paper9.pdf

MS disseration on CNC Machine Setup Time Reduction 2009 - Haiqing Guo - MIT
http://dspace.mit.edu/bitstream/handle/1721.1/55215/611148027.pdf?...1



CNC Programming Handbook: A Comprehensive Guide to Practical CNC Programming
Peter Smid
Industrial Press Inc., 2003 - Computers - 508 pages

Extraordinarily comprehensive, this popular and authoritative reference covers just about every possible subject a typical CNC programmer may encounter on a daily basis. Fully indexed to help the user quickly locate topics of interest, this "industrial strength" handbook presents most common programming subjects in great depth and is equally applicable to both CNC milling and CNC turning operations. Many advanced subjects are also covered, thus making this an unusually comprehensive reference for machinists, programmers, engineers, and supervisors. Filled with over one thousand illustrations, tables, formulas, tips, shortcuts, and practical examples, this widely respected publication is structured in a logical order that is readily adaptable to virtually all levels of CNC training, from the basic to the advanced.

CNC Programming Handbook has just become more valuable than ever! A new CD-ROM, packed with actual problem-solving projects and enhancing the material presented in the book, is included for the first time. Users will find programming projects and exercises for most chapters, special programming and machining projects, solutions to problems, and numerous reference files useful in CNC programming, as well as several utilities. With the majority of files in Adobe PDF, instructors will be able to quickly and easily print and distribute any of the projects, exercises, and references to their classes. Meanwhile, students and professionals will find this CD an effective self-study aid that allows them to enhance their understanding of the subject one topic at a time. Presents complete information on various programming techniques, from the basic areas to dozens of advanced concepts. Includes more than 1,000 illustrations, tables, formulas, tips, shortcuts and real-world examples. Offers unparalleled reference material useful for skills training at all levels of CNC. Presents an encyclopedic, logically organized approach to CNC programming, allowing the reader to look up a subject of interest only. Uses cross references throughout to guide the reader to the proper answer or solution to a problem.
http://books.google.co.in/books?id=JNnQ8r5merMC

Understanding CNC Machines, Setup and Operation
Richard N. Jackson
Clinton Gilkie
http://books.google.co.in/books?id=GuBSl1NHSh4C

Organizational Skills Cut Machine Setup Time
http://www.mmsonline.com/columns/organizational-skills-cut-machine-setup-time

CNC Machining Fundamentals
http://www.mfgaa.com/fundamentals.html

Magnetic vice
http://www.industrydepot.com/ProductivityNews0113.htm

Zero point mounting kits for setup time reduction
http://clrh.com/swiftsure/starkkits.html

Set up Reduction – A perfect way for productivity improvement of computer numerical control (CNC) set
up in manufacturing company
by - Patel Chintan Kumar, Department of Mechanical Engineering, C. K. Pithawala College of Engineering and Technology, Dumas Road, Surat-395007, Gujarat, India.
17 August, 2012
http://academicjournals.org/article/article1382090861_Kumar.pdf

Benefits of Presetting systems - CNC Setup
http://www.pomlearning.org/reno/fullpapers/020-0030%20Statement%20of%20Losses.pdf


How to reduce setup time in CNC tool grinding?
http://rollomaticusa.wordpress.com/2013/01/08/12/


Spencer Tool Setter with CNC software program that assists your operator in accurately measuring and recording tool lengths into the CNC memory.
http://www.stevespencermachinery.com/?page_id=46


Setup Reduction For CNC Machining & Turning Centers CD Rom Course $239.00
http://stepper3.com/index.php?main_page=product_info&products_id=135

Vacuum Clamping technology for cnc tools
http://www.protech.hu/schmalz/CNC_Vakuum.pdf

CNC Tool Cart
http://blog.5ssupply.com/2013/08/19/one-simple-solution-to-reduce-waste-of-searching-for-cnc-machine-tooling/

Increasing CNC Production throughput with Tool Presetting with a YouTube video of 14 minutes embedded
2012
http://nextgentooling.com/profiles/blogs/increasing-cnc-production-throughput-with-tool-presetting

Workstops and Gang Tool Holders for CNC
http://toolpal.com/cnc-setup-tools/


CNC Machine Productivity Series Articles

http://www.cnccookbook.com/CCCNCMachiningManufacturing.htm

CNC Machine Productivity - Basic article
http://www.cnccookbook.com/CCCNCMachineShopProductivity.htm

Whether to focus on saving Machine Cycle Time or Machine Setup Time to improve Shop Productivity?
http://www.cnccookbook.com/CCCNCCycleTimeSetupTime.htm

Top Shops - What do they do differently?
http://blog.cnccookbook.com/2013/07/29/what-do-the-top-shops-do-that-makes-them-special/

Are you using High Speed Machining? - Above 18,000 rpm
http://www.cnccookbook.com/CCCNCMillFeedsSpeedsHighSpeedMachining.htm

By incorporating new CNC programming software to make full use of its new five-axis machining capabilities, Bob Lewis Machine Co. has reduced setups and programming time.
Case Study From: 4/19/2013 Modern Machine Shop
http://www.mmsonline.com/articles/cnc-programming-software-maximizes-five-axis-capability


Cycle Time Reduction for Bearing House Assembly
K. Saran Kumar Reddy, T. Panneer Selvam and R. Venkatraman
Published: June 30, 2012
http://scialert.net/fulltext/?doi=jas.2012.992.998&org=11

Mill/Turn centers or Multitasking machines.
http://www.sme.org/MEMagazine/Article.aspx?id=67675&taxid=1418

Drastic Reduction in piece times with high performance cnc machining - 2008
http://www.index-werke.de/mediadata/tnx-0199e.pdf


To be updated 27.4.2022,  11.3.2022, 6 December 2019,   7 April 2016

26.3.2014

17 comments:

  1. Nice post. Thanks for sharing this blog. We also manufactures of Flange Assembly Manufacturers Flange Assembly Manufacturer

    ReplyDelete
  2. I really enjoy reading and also appreciate your work.
    Cnc Bandsaw machine

    ReplyDelete
  3. The CNC Machine Tools are faster mean of producing large number of goods in day. They have the capacity to up lift the economy of nation.

    ReplyDelete
  4. he blog post is written in a superb way.......Clearly gives overview of industrial skill training
    CNC Programming Training>

    ReplyDelete
  5. Thank you for sharing such great information very useful to us.
    CNC Training in Gurgaon

    ReplyDelete
  6. Excellent information on CNC machine setup.This is really helpful. If you are looking for CNC Manufacturing Companies then J C Milling Inc is the best place for you.

    ReplyDelete
  7. This article provides detailed info which helped me to know more about cnc build. Please keep posting similar posts. We are providing the USA made tool carts.
    To know more about cnc storage tool contact us!

    ReplyDelete
  8. I’d like to thank you for writing on this topic. The information you provided was very useful. I will visit again in the near future.
    quartz machining

    ReplyDelete
  9. I am so happy after reading your blog. It’s very useful blog for us.

    Angular 7 Corporate training in Tanzania

    ReplyDelete
  10. Thank You for Sharing This Extensively Helpful Blog Post. Interesting Content, I Would Like to Add That Bore Finishing is a Very Crucial Process in Manufacturing of Auto Components, Hydraulics Valves and Accessories, Aerospace Components, Defense Equipment Etc. Day by Day Bore Accuracies and Surface Finish Required is More and More Precise. In Conventional Honing, the Tool Rotates Reciprocates and Expands to Remove the Desired Material From the Part Bore. Controlling the Bore Size is Difficult to Achieve by This Process. This Demands More Reliable Process Than Conventional Honing. One Such Process is Single Pass Honing Machine or Single Stroke Honing or Precedor Honing or Diamond Reaming. This is a Progressive Honing Process. Khushbu India manufactures Single Pass Honing Machines in India. Khushbu Engineers Has Exported Machines to USA, China, Europe, Middle East and South Africa.

    ReplyDelete
  11. I got wonderful information from this blog. Thanks for sharing this post. it becomes easy to read and understand the information.. machined parts manufacturer

    ReplyDelete
  12. Good post. I was searched this topic. Finally I got the information in this blog. Thanks for posting such a nice article. CNC milling

    ReplyDelete
  13. The world is shifting towards more mechanized production methods; industries are competing with each other to adopt the latest advancement in technology. Similarly, the manufacturing industry is not far behind; gone are the old days of regular machining. Processes now use Computer Numerical Control (CNC) Machining. 

    The manufacturing industry relies on CNC because it offers a wide range of advantages over regular machining. Full service CNC machining has proven to be highly accurate, efficient and productive in contrast to conventional machining.

    ReplyDelete
  14. Thank you for sharing this. Being a Honing Machine Manufacturer I feel it is essential to reduce the set-up time. The lower the setup time, sooner clients can continue with their operations.

    ReplyDelete
  15. Thank you for sharing such wonderful information about CNC auto parts . Keep posting and keep sharing!

    ReplyDelete
  16. We appreciate your kind feedback on our informative blog about CNC machine. We're glad it has been valuable to you and helped broaden your knowledge. Thank you!




    ReplyDelete